Wednesday, October 28, 2020

Building Secure Layer-2 Data Center Fabric with Cisco Nexus Switches

One of my readers is designing a layer-2-only data center fabric (no SVI interfaces on switches) with stringent security requirements using Cisco Nexus switches, and he wondered whether a host connected to such a fabric could attack a switch, and whether it would be possible to reach the management network in that way.

Do you think it’s possible to reach the MANAGEMENT PLANE from the DATA PLANE? Is it valid to think that there is a potential attack vector that someone can compromise to source traffic from the front of the device (ASIC) through the PCI bus across the CPU to the across the PCI bus to the Platform Controller Hub through the I/O card to spew out the Management Port onto that out-of-band network?

My initial answer was “of course there’s always a conduit from the switching ASIC to the CPU, how would you handle STP/CDP/LLDP otherwise”. I also asked Lukas Krattiger for more details; here’s what he sent me:



source https://blog.ipspace.net/2020/10/building-secure-layer-2-fabric.html?utm_source=atom_feed

No comments:

Post a Comment